NEC SL1100 - Page 855

To program a key, press Speaker key, dial 751 (for 2-digit codes) or 752 (for 3-digit codes), press the key
and enter the code (e.g., 48 for Voice Over).
Use this key... For this feature... When you ... Key Lamp Status Also see Srvc
Code
Note
Code:
*
03 + ext.
or department
group
Operation: Press
key
Virtual Extension
Keys
Virtual Extension
Key: Place or an-
swer a call from
your virtual (phan-
tom) extension or
Virtual Extension
Key: Place or an-
swer a call to your
co-worker’s exten-
sion.
Slow Flash red when
ringing, On red when
busy
-
Code:
*
04 + orbit
(01~64)
Operation: Place
or answer call +
Press key
Park Place a call into or
retrieve a call from
a Park Orbit.
Fast Flash when orbit
is busy (green at origi-
nator, red at others)
<Park>
#6
<Pickup>
*
6
Code:
*
06 + Net-
work number (1 ~
5)
Operation: Press
key
Networking Access a networked
trunk.
None - (V1.5 Added)
Code:
*
10
Operation: Press
key to log in
Press key + 1 to
log out or 0 to can-
cel
Automatic Call Dis-
tribution (ACD)
Basic Operation
Log in or out of an
ACD Group.
On red when logged in
Off when logged out
*
5 (V1.5 Added)
Code:
*
13
Operation: Press
key
Automatic Call Dis-
tribution (ACD)
Rest Mode
Enable/disable Rest
Mode.
On red when Rest
Mode enabled
Off when Rest Mode
disabled
- (V1.5 Added)
Code:
*
17
Operation:
Automatic Call Dis-
tribution (ACD)
Work Time
Enable/disable
Work Time.
On when Work Time
enabled, Flashing
(while on a call) if Auto
Work time enabled
Off when Work Time
disabled
- (V1.5 Added)
Code:
*
19
Operation: Press
key while on-hook
+ Vol Up or Vol
Down to scroll
Automatic Call Dis-
tribution (ACD)
Queue Status
Check View the
ACD Queue Status
of each ACD group.
None - (V1.5 Added)
ISSUE 2.0 SL1100
Features and Specifications Manual 2-25