NEC SL1100 - Figure 3-9 Utility Select Inmail Card Screen; Figure 3-10 Updated Inmail Portion of Inmail Utility Main Screen

1. From the Figure 3-8 InMail Utility Main Screen on page 3-6, click on the drop-down box.
Figure 3-9 Utility Select InMail Card Screen on page 3-7 is displayed.
Device Select the InMail
card from the drop-down
box.
Figure 3-9 Utility Select InMail Card Screen
If the InMail CompactFlash Card is changed in the middle of an InMail Utility session, click Refresh,
then Select to read the new card.
2. The Language Prompt portion of the Main Screen updates with the prompt version information.
Refer to Figure 3-8 InMail Utility Main Screen on page 3-6.
Refresh Drivelist: This resets drive list if
InMail CF was connected to support PC after
Utility was started.
Device: The card reader
drive ID or volume label
(if any).
Figure 3-10 Updated InMail Portion of InMail Utility Main Screen
Backing Up the InMail CompactFlash Card
The voice prompts, and the recorded names, messages and greetings stored on the InMail
CompactFlash Card can be backed up to the hard drive on the PC.
ISSUE 3.5 SL1100
InMail Feature Manual 3-7