Quick Setup
SECTION 1 UPGRADE THE INMAIL BOARD
The InMail CompactFlash drive must never be inserted or removed with the
KSU power on. Always turn KSU power OFF when inserting or removing the
InMail CompactFlash drive.
The InMail software is integrated into the telephone system software. The InMail voice prompts and
messages are stored on the CompactFlash card that plugs into the InMail Board (VMDB) .
CF card
CF Slot (CN2)
CPU card
VMDB
Figure 1-1 InMail Daughter Board with CompactFlash Card Assembly Installed
1. Power down the system before removing the InMail CompactFlash card.
• Ensure the system is powered down.
2. Slide out the CompactFlash card. See Figure 1-2 Remove the InMail CompactFlash Card on
page 1-1.
• Be sure to take adequate static precautions.
Figure 1-2 Remove the InMail CompactFlash Card
InMail Feature Manual
1-1
Quick Setup
1