NEC SL1100 - Page 111

NEC SL1100 Issue 6.0
Networking Manual 7 - 17
84-13-06
SIP Trunk CODEC
Information Basic Setup –
G.711 Jitter Buffer (max)
0 ~ 255ms
Default is 80
 Version 5.0 or higher: Select SIP
Profile 1-2.
Set the maximum G.711 Jitter
Buffer.
84-13-07
SIP Trunk CODEC
Information Basic Setup –
G.729 Audio Frame Number
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
5 = 50ms
6 = 60ms
Default is 2
 Version 5.0 or higher: Select SIP
Profile 1-2.
Set the G.729 Audio Frame
Number.
84-13-08
SIP Trunk CODEC
Information Basic Setup –
G.729 Voice Activity
Detection Mode
0 = Disable
1 = Enable
Default is 0
 Version 5.0 or higher: Select SIP
Profile 1-2.
Enable/Disable the G.729 VAD
Detection Mode.
84-13-09
SIP Trunk CODEC
Information Basic Setup –
G.729 Jitter Buffer (min)
0 ~ 300ms
Default is 20
 Version 5.0 or higher: Select SIP
Profile 1-2.
Set the minimum G.729 Jitter
Buffer.
84-13-10
SIP Trunk CODEC
Information Basic Setup –
G.729 Jitter Buffer (average)
0 ~ 300ms
Default is 40
 Version 5.0 or higher: Select SIP
Profile 1-2.
Set the average G.729 Jitter
Buffer.
Program/Item
No.
Description/
Selection
Assigned Data Comments