NEC SL1100 - Page 112

Issue 6.0 NEC SL1100
7 - 18 SIP Trunking
84-13-11
SIP Trunk CODEC
Information Basic Setup –
G.729 Jitter Buffer (max)
0 ~ 300ms
Default is 80
 Version 5.0 or higher: Select SIP
Profile 1-2.
Set the maximum G.729 Jitter
Buffer.
84-13-12
SIP Trunk CODEC
Information Basic Setup –
Number of G.723 Audio
Frame
1 = 30ms
2 = 60ms
Default is 1
 Version 5.0 or higher: Select SIP
Profile 1-2.
Maximum number of the G.723
Audio Frame.
84-13-14
SIP Trunk CODEC
Information Basic Setup –
G.723 Jitter Buffer -
Minimum
0 ~ 300ms
Default is 30
 Version 5.0 or higher: Select SIP
Profile 1-2.
Set the minimum value of the
G.723 Jitter Buffer.
84-13-15
SIP Trunk CODEC
Information Basic Setup –
G.723 Jitter Buffer -
Standard
0 ~ 300ms
Default is 60
 Version 5.0 or higher: Select SIP
Profile 1-2.
Set the average value of the
G.723 Jitter Buffer.
84-13-16
SIP Trunk CODEC
Information Basic Setup –
G.723 Jitter Buffer -
Maximum
0 ~ 300ms
Default is 120
 Version 5.0 or higher: Select SIP
Profile 1-2.
Set the maximum value of the G.
723 Jitter Buffer.
84-13-17
SIP Trunk CODEC
Information Basic Setup –
Jitter Buffer Mode
1 = Static
3 = Adaptive Immediately
Default is 3
 Version 5.0 or higher: Select SIP
Profile 1-2.
Set the Jitter Buffer Mode.
Program/Item
No.
Description/
Selection
Assigned Data Comments