NEC SL1100 - Page 114

Issue 6.0 NEC SL1100
7 - 20 SIP Trunking
84-13-32
SIP Trunk CODEC
Information Basic Setup –
DTMF Relay Mode
0 = Disable
1 = RFC2833
Default is 0
 Version 5.0 or higher: Select SIP
Profile 1-2.
Determine the DTMF setup.
84-13-33
SIP Trunk CODEC
Information Basic Setup –
Number of G.722 Audio
Frames
1~4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
Default is 3
 Version 5.0 or higher: Select SIP
Profile 1-2.
84-13-35
SIP Trunk CODEC
Information Basic Setup –
G.722 Jitter Buffer (min)
0~255ms
Default is 30
 Version 5.0 or higher: Select SIP
Profile 1-2.
84-13-36
G.722 Jitter Buffer (average) 0~255ms
Default is 60
 Version 5.0 or higher: Select SIP
Profile 1-2.
84-13-37
G.722 Jitter Buffer (max) 0~255ms
Default is 120
 Version 5.0 or higher: Select SIP
Profile 1-2.
Program/Item
No.
Description/
Selection
Assigned Data Comments