NEC SL1100 - Page 116

Issue 6.0 NEC SL1100
7 - 22 SIP Trunking
84-13-50
SIP Trunk CODEC
Information Basic Setup –
FAX Relay Mode
0 = Disable
1 = T.38
2 = Path Through
Default is 0
 Version 5.0 or higher: Select SIP
Profile 1-2.
Set the FAX Relay Mode.
84-13-51
SIP Trunk CODEC
Information Basic Setup –
T.38 Protocol Mode
0 = RTP/UDPTL
1 = UDPTL/RTP
2 = RTP Only
3 = UDPTL Only
Default is 1
 Version 5.0 or higher: Select SIP
Profile 1-2.
84-13-52
SIP Trunk CODEC
Information Basic Setup –
FAX Maximum Rate
1 = 4800bps
3 = 9600bps
5 = 14400bps
Default is 5
 Version 5.0 or higher: Select SIP
Profile 1-2.
84-13-56
SIP Trunk CODEC
Information Basic Setup –
Low Speed Redundancy
0 ~ 2
Default is 0
 Version 5.0 or higher: Select SIP
Profile 1-2.
84-13-57
SIP Trunk CODEC
Information Basic Setup –
High Speed Data Packet
Redundancy
0 ~ 2
Default is 0
 Version 5.0 or higher: Select SIP
Profile 1-2.
Program/Item
No.
Description/
Selection
Assigned Data Comments