Issue 6.0 NEC SL1100
7 - 26 SIP Trunking
6.9 SIP Server Information Setup
84-14-09
SIP Trunk Basic Information
Setup – Called Party
Information
0 = Request URI
1 = To Header
Default is 0
Version 5.0 or higher: Select SIP
Profile 1-2.
Set the Called Party
Information.
Program/Item
No.
Description/
Selection
Assigned Data Comments
Program/Item
No.
Description/
Selection
Assigned Data Comments
10-29-01
SIP Server Information
Setup – Default Proxy
(Outbound)
0 = Off
1 = On
Default is 0
Version 5.0 or higher: Select SIP
Profile 1-2.
Define the SIP Proxy setup,
Default Proxy (Outbound).
When SIP trunking is used, this
must be on.
If entries are made in Program
10-29-xx for a SIP Server and
the SIP Server is then removed
or not used, the entries in
Program 10-29-xx must be set
back to their default settings.
Even if 10-29-01 is set to 0, the
NEC SL1100 still checks the
settings in the remaining 10-29
programs.
10-29-02
SIP Server Information
Setup – Default Proxy
(Inbound)
0 = Off
1 = On
Default is 0
Version 5.0 or higher: Select SIP
Profile 1-2.
Define the Default Proxy
(inbound).
To Next Page
Loading...
