NEC SL1100 - Page 217

NEC SL1100 Issue 6.0
Networking Manual 10 - 5
2.2.2 VoIP ToS Setup
2.2.3 SIP Peer to Peer
2.2.4 IP Extension Numbering
Program
Number
Program Name
Description/
Comments
Assigned Data 1 2 3
84-10-01
ToS Setup – ToS Mode Use this field to define
your SIP QoS marking
for ToS or Diffserv.
When Input Data is set
to 1, Item No. 07 is
invalid.
When Data is set to 2,
Item No. 02 ~ 06 are
invalid.
0 = Disabled (Invalid)
1 = IP Precedence
2 = Diffserv
Default is 0
X
Program
Number
Program Name
Description/
Comments
Assigned Data 1 2 3
10-26-02
IP System Operation Setup –
RTP Forwarding Mode
0 = No (Disable)
1 = Yes (Enable)
(default is 0)
X
10-26-03
IP System Operation Setup –
SIP Peer to Peer Mode
Enable or disable
Peer-to-Peer mode for
SIP phones with
Version 4.0 or higher
software. When PRG
10-33-05 NAT mode is
set to 1 (Enable), P2P
mode for SIP phones
always set to Off
automatically
regardless of this
program setting.
0 = No (Disable)
1 = Yes (Enable)
(default is 0)
X
Program
Number
Program Name
Description/
Comments
Assigned Data 1 2 3
11-01-01 System Numbering
Refer to the SL1100
Programming Manual
for all options and
default settings.
1 = 3 Digit; Intercom
Default is 3 Digit;
Intercom
X