NEC SL1100 Issue 6.0
Networking Manual 13 - 23
11-12-16 Trunk Access via Networking
This code allows the user to dial the access code
(default 726), then the two-digit remote system
number (01 ~ 04 from PRG 10-27), and then the
telephone number to complete a call from a
destination systems trunk.
An example of dialing this code and calling out of
Remote system 1 would be:
user goes off hook and dials 726 01
92145552000.
Default Access Code = 726
26-02-03 ARS/LCR additional data
If using ARS for the trunk group routing, four new
items have been added to the additional data
field. The options are 101 ~ 104 and these
options allow the caller to access and make calls
out of one of the Remote Systems Trunks.
101 will access trunks from Remote system 1 that
is programmed in 10-27-01.
102 will access trunks from Remote system 2 that
is programmed in 10-27-01.
103 will access trunks from Remote system 3 that
is programmed in 10-27-01.
104 will access trunks from Remote system 4 that
is programmed in 10-27-01.
If 26-02-02 is set to Trunk Group
0 = No Routing (Calls will not route
)
1 ~ 25 = Trunk Groups 1 ~ 25
101 ~ 104 = Remote Systems 1 ~ 4
If 26-02-02 is set to F-Route
0 = No Routing (Calls will not route
)
1 ~ 100 = F-route tables 1 ~ 100
101 ~ 104 = Remote Systems 1 ~ 4
(default =0)
44-05-01 F-Route trunk group number
If using F-Route for the trunk group routing, four
new items have been added to the trunk group
field. The options are 101 ~ 104 and these
options allow the caller to access and make calls
from a Remote System Trunk.
101 will access trunks from Remote system 1 that
is programmed in 10-27-01.
102 will access trunks from Remote system 2 that
is programmed in 10-27-01.
103 will access trunks from Remote system 3 that
is programmed in 10-27-01.
104 will access trunks from Remote system 4 that
is programmed in 10-27-01.
0 = No Setting(Calls will not route
)
1~25 = Trunk Group 1 ~ 25
101 ~ 104 = Remote Systems 1 ~ 4
255 = Intercom
(default =0)
Program
Number
Program Name/Description Assigned Data
To Next Page
Loading...
