NEC SL1100 - Figure B-5 Multiassign - Virtual Extension Numbers; Figure B-6 Multiassign - Department Group Pilot Numbers

NEC SL1100 Issue 3.01
PC Programming Manual B - 7
___________________________________________________________________________________
___________________________________________________________________________________
4. When the MultiAssign icon is pressed from System/Numbering/Virtual
Extension the following screen will be presented. Note the default ports for
Virtual extension assignment is 1-50. All other assignments are the similar to
extension numbering.
5. When the MultiAssign icon is pressed from System/Numbering/Department
Groups the following screen will be presented. Note the default ports for
Department Group Pilot numbers are 1-32. All other assignments are the similar
to extension numbering.
Figure B-5 MultiAssign - Virtual Extension Numbers
Default
Ports
Figure B-6 MultiAssign - Department Group Pilot Numbers
Default
Ports