NEC SL1100 - Individual Trunk Group Routing for Extensions

Program 21 : Outgoing Call Setup
21-15 : Individual Trunk Group Routing for Extensions
Level:
IN
Description
Use Program 21-15 : Individual Trunk Group Routing for Extensions to designate the alternate
trunk access route accessed when a user dials the Alternate Trunk Route Access Code. Refer to
Program 11-09 : Trunk Access Code on page 2-68 when setting up alternate trunk codes. Refer to
14-06 : Trunk Group Routing on page 2-117 to set up the trunk routes. When entering data for this
option, enter the route number or 0 to prevent routing.
Input Data
Extension Number Maximum eight digits
Day/Night Mode 1 ~ 8
Item
No.
Item Input Data Description Default
01 Route Table Number 0 ~ 25
0 = No Setting (Calls will
not route.)
This assigns extensions per day/night
mode to a route table (PRG 14-06-01).
This program follows the special trunk ac-
cess code from PRG 11-01-01 and
11-09-02.
0
Conditions
None
Feature Cross Reference
• Central Office Calls, Placing
ISSUE 6.0 SL1100
Programming Manual 2-245
Program
21