NEC SL1100 - Program 22: Incoming Call Setup; System Options for Incoming Calls

Program 22 : Incoming Call Setup
22-01 : System Options for Incoming Calls
Level:
IN
Description
Use Program 22-01 : System Options for Incoming Calls to define the system options for incoming
calls.
Input Data
Item
No.
Item Input Data Description Default Related
Program
01 Incoming Call
Priority
0 = Intercom Call Priori-
ty
1 = Trunk Call Priority
Use this option to determine if Inter-
com calls or trunk calls have answer
priority when both are ringing simul-
taneously.
1 15-02-22
02 Incoming Call
Ring No Answer
Alarm
0 = Disable (Off)
1 = Enable (On)
If enabled, an incoming call that
rings longer than the Ring No An-
swer Alarm interval (22-01-03),
changes to a unique ring cadence to
indicate that the call has been ring-
ing too long. If disabled, this does
not occur.
0 22-01-03
22-01-04
03 Ring No Answer
Alarm Time
0 ~ 64800 seconds If a trunk rings a multiline telephone
longer than this interval, the system
changes the ring cadence. This indi-
cates to the user that the call has
been ringing too long.
60 22-01-02
04 DIL No Answer
Recall Time
0 ~ 64800 seconds
0 = No Overflow
A DIL that rings its programmed
destination longer than this interval
diverts to the DIL No Answer Ring
Group (set in Program 22-08).
0
06 DID Ring-No-An-
swer Time
0 ~ 64800 seconds In systems with DID Ring-No-An-
swer Intercept, this sets the Ring-
No-Answer time. This time is how
long a DID call rings the destination
extension before rerouting to the in-
tercept ring group.
20 22-12
07 DID Incoming
Ring Group No
Answer Time
0 ~ 64800 seconds 20
08 DID Pilot Call No
Answer Time
0 ~ 64800 seconds 60
09 DID to Trunk to
Trunk no answer
timer
0 ~ 64800 seconds 20
10 VRS Waiting
Message Opera-
tion
0 = Automatic Opera-
tion
1 = Manual Operation
Set up the operation mode for Auto
Attendant and Queuing Message.
0 22-14
22-15
22-08
22-04
22-01-04
20-15-11
15-07
ISSUE 6.0 SL1100
Programming Manual 2-255
Program
22