NEC SL1100 - 4 Solution Configuration

IN STRICTEST CONFIDENCE
BT Wholesale
Issue 1: 2012© British Telecommunications plc
Page 11 of 33
IN STRICTEST CONFIDENCE
4 SOLUTION CONFIGURATION
The following diagram shows an example of a typical deployment configuration with the NEC
SL1100/SV8100. Typically, the SL1100/SV8100 is placed at the customer premises with either
Analogue to IP handset connected/registered to it.
The SL1100/SV8100 registers the main line (or Trunk Group number) with the Trunk Group
configured on IPVS. This enables all PBX users to be implicitly registered with IPVS via the trunk group
number registration.
IP Network
NEC SL1100/
SV8100
Trunk Group Number
441234567890@<Network Defined Domain>
Trunk Group Profile Data:
Device Type: NEC SL1100/NEC SV8100
Trunk Group Number Profile Data:
Line/port: 441234567890@<Network Defined Domain>
Authentication Username: 441234567890
Authentication Password: password
DDI: 01234 567890
PBX User 1:
User Type: Business Trunking User
Feature Package: SIP Trunk User / SIP Mobility User etc
Add-ons: Toolbar, Voicemail etc
Device Type: Trunk Group
Line/port: 441234567891@<Network Defined Domain>
DDI: 01234 567891
PBX User 2:
User Type: Business Trunking User
Feature Package: SIP Trunk User / SIP Mobility User etc
Add-ons: Toolbar, Voicemail etc
Device Type: Trunk Group
Line/port: 441234567892@<Network Defined Domain>
DDI: 01234 567892
SIP Registra/Proxy Data:
FQDN: <Network Defined Domain>
Port: 5060
Outbound Proxy Data:
FQDN: <Network Defined Domain>
Port: 5060
Router / IP
access
PBX User 1
01234 567891
PBX User 2
01234 567892