NEC SL2100 - Page 134

Guide to Feature Programming
Program
No.
Program Name Input Data Default
11-11-07 Service Code Setup (for Setup/Entry Operation) -
Call Forwarding - Follow-Me
0~9,
*
, # Maximum of 8 digit 746
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-11-05 Class of Service Options (Hold/Transfer Service)
- Call Forwarding with Follow Me
0 = Off
1 = On
COS 01 ~ 15 = 1
Operation
To activate Call Forward Follow Me from a Multiline Terminal:
1.
At a Multiline Terminal, other than your own, press Speaker key and dial Service Code (746, PRG
11-11-07).
- OR -
Press the Call Forward Follow Me key (PRG 15-07-01 or SC 751: Code 15).
2. Dial 1 to set.
3. Dial the Extension to forward.
The Multiline Terminal with display indicates on the display of the telephone which Call Forward
Follow Me is set. Also, the Pr
ogrammed Follow Me Flexible Line Key flashes (if assigned) when
Follow Me is set.
To cancel Call Forward Follow Me from your own Multiline Terminal:
1.
At your Multiline Terminal, press Speaker key and dial Service Code (746, PRG 11-11-07).
- OR -
Press the Call Forward Follow Me key (PRG 15-07-01 or SC 751: Code 15).
2. Dial 0 to cancel.
3. Dial 0 (Cancel All Forward Follow Me).
- OR -
Dial the extension number with Follow Me set.
To activate Call Forward Follow Me from a Single Line Terminal:
1. At a Single Line Terminal, other than your own, lift the handset and dial the Service Code (746,
PRG 11-11-07).
2. Dial 1 to set.
3. Dial the extension to forward.
To cancel Call Forward Follow Me from your own Single Line Terminal:
1. At your Single Line Terminal, lift the handset and dial Service Code (746, PRG 11-11-07).
2. Dial 0 to cancel.
SL2100 ISSUE 1.0
1-120
Call Forwarding with Follow Me
C