NEC SL2100 - Page 171

8. Dial the Speed dial bin in which the number is to be stored. If you press Hold key, the next
available Speed Dial bin will be used. The display shows:
ABB xxxx
nnnnnnnn
9. Press Hold key. The display shows:
ABB xxxx
-
10. Enter the name to be associated with the stored number.
ABB xxxx
-zzzzzzzz
11. Press Hold key to set completed.
Set ABB
12. Press Speaker key to return to idle.
To store a Caller ID number in a One-Touch key:
(Following operation is available for 2W Digital Multiline Terminal/ IP Multiline Terminal Only.)
1. With a telephone in an idle condition the display shows:
1-01 FRI 09:00AM
301 STA 301
LIST DIR ICM PROG
2. Press the List softkey.
- OR -
Press the Left Cursor key twice and skip step 3. The display shows:
LIST MENU
Redial CID
3. Press the CID softkey (Caller ID). The display shows:
##: xxxxxxxxxxxxx
mm-dd hh:mm
Store DEL
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date and time
= Preview List
= Next List
Store = Store in List
DEL = Delete from List
ISSUE 1.0
SL2100
Features and Specifications Manual 1-157
C