System Availability
Terminals
All Terminals
Required Component(s)
None
Related Features
Account Code Entry
Automatic Route Selection (ARS/F-Route)
Central Office Calls, Placing
Code Restriction/Toll Restriction
Dial Tone Detection
One-Touch Calling
PBX Compatibility/Behind PBX
Programmable Function Keys
Single Line Terminals
Trunk Group Routing
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
System Speed Dial
Program
No.
Program Name Input Data Default
13-01-01 Speed Dialing Function Setup - Speed Dialing
Auto Outgoing Call Mode
0 = Trunk Outgoing Mode (Use
trunk group assigned in PRG
13-05.)
1 = Intercom Outgoing Mode
(Follow the system routing for the
trunk access code entered.)
0
13-01-03 Speed Dialing Function Setup - Common Speed
Dial Table Size
0 ~ 1000
0 = No Common Speed Dialing
(No System Speed Dial)
900
ISSUE 1.0 SL2100
Features and Specifications Manual 1-5
A
To Next Page
Loading...
