Program
No.
Program Name Input Data Default
13-05-01 Speed Dial Trunk Group/Route - Trunk Group/
Route Number
0 = Follow the caller's extension
trunk group routing (PRG 21-02)
1 ~ 50 = Trunk group 1 ~ 50
No Setting
13-04-01 * Speed Dialing Number and Name - Number Maximum of 36 digits (0 ~ 9,
,
#, @, P, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
13-04-02 * Speed Dialing Number and Name - Name Maximum 12 Characters (Use di-
al pad to enter name)
No Setting
11-10-04 Service Code Setup (for System Administrator) -
Storing Common Speed Dialing Numbers
0~9,
, # Maximum of 8 digit 753
20-07-04 Class of Service Options (Administrator Level) -
Storing Speed Dialing Entries
0 = Off (Deny)
1 = On
COS1 ~ 14/COS15 = 1
11-12-10 Service Code Setup (for Service Access) - Speed
Dial Common/Station
0~9,
, # Maximum of 8 digit #2
20-08-03 Class of Service Options (Outgoing Call Service)
- System Speed Dialing
0 = Off (Deny)
1 = On
COS 01 ~ 15 = 1
15-07-01 Programmable Function Keys 27 = Common/Private Speed Di-
al
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
Additional Data for Group Speed Dial
Program
No.
Program Name Input Data Default
13-03-01 * Speed Dialing Group Assignment for Extensions
- Speed Dial Group
01 ~ 50
Assign group number for exten-
sion
1
13-02-01 * Group Speed Dialing Bins 0 ~ 999 = Speed dial bins 0 ~
999
0
11-10-05 Service Code Setup (for System Administrator) -
Storing Group Speed Dialing Numbers
0~9,
, # Maximum of 8 digit 754
20-07-04 Class of Service Options (Administrator Level) -
Storing Speed Dialing Entries
0 = Off (Deny)
1 = On
COS1 ~ 14/COS15 = 1
11-12-11 Service Code Setup (for Service Access) - Group
Speed Dialing
0~9,
, # Maximum of 8 digit #4
20-08-04 Class of Service Options (Outgoing Call Service)
- Group Speed Dialing
0 = Off (Deny)
1 = On
COS 01 ~ 15 = 1
15-07-01 Programmable Function Keys 28 = Group Speed Dial Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
SL2100 ISSUE 1.0
1-6
Abbreviated Dialing/Speed Dial
A
To Next Page
Loading...
