NEC SL2100 - Figure 1-4 Walking Code Restriction

Program
No.
Program Name Input Data Default
35-02-18 SMDR Output Options - Print Mode for Caller
Name of Incoming Call
0 = Normal
1 = Line Feed
0
Should the Walking Toll
Restriction service code
be changed from the
default setting of 663?
In PRG 11-11-36, change
the service code to
the desired entry.
In PRG 21-14-01, assign a
table with the 6-digit user ID dialed
to override the Toll Restriction.
Use PRG 21-01-07 to determine
how long the system should remove
Toll Restriction from the extension.
In PRG 21-14-02, for each table,
assign the Toll Restriction Class of
Service to be used when a user dials
the 6-digit ID assigned in PRG 21-14-01.
(This entry should provide greater
access than the level defined in
PRG 21-04-01.)
The Toll Restriction Class of
Service used is the same as those
used by PRG 21-04-01. Refer
to the Toll Restriction feature
for defining these classes.
Start
Stop
No
Yes
Figure 1-4 Walking Code Restriction
ISSUE 1.0
SL2100
Features and Specifications Manual 1-199
C