3. Dial the 4-digit Code Restriction Override code.
If you wait too long before going to the next step, you may have to repeat the procedure. After dialing
the service code, the display indicates the override codes as they are being entered. As the last digit is
entered, the display is cleared and ICM dial tone is heard.
You hear an error tone if you dial your code incorrectly.
4. Press idle line key or dial trunk access code.
5. Dial the number without any restriction.
To use your Walking Code Restriction level at an extension:
You can override restriction for only one call at a time.
1. At the Multiline Terminal, press Speaker key.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial 663 and dial the 6-digit Walking Toll Restriction Class of Service code.
After dialing the service code, the display indicates the override codes as they are being entered. As
the last digit is entered, the display is cleared and ICM dial tone is heard.
You hear an error tone if you dial your code incorrectly.
3. Press idle line key or dial trunk access code.
4. Dial the number.
The call is allowed or denied based on the user’s Toll Restriction Class of Service level.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-201
C
To Next Page
Loading...
