Guide to Feature Programming
Program
No.
Program Name Input Data Default
14-07-01 Trunk Access Map Setup - Access Map 0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on
Hold
4 = Outgoing access and access
when trunk on Hold
5 = Incoming access and access
when trunk on Hold
6 = Incoming and Outgoing ac-
cess
7 = Full access
Access Map 1~128 =
Trunk Ports 1~128 as-
signed with option 7 ac-
cess (incoming and
outgoing access and
access when trunk is
on Hold).
15-06-01 Trunk Access Map for Extensions - Trunk Ac-
cess Map Number
001 ~ 128 1
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
15-09-01 Virtual Extension Ring Assignment - Ringing 0 = No Ringing
1 = Ring
0
15-11-01 Virtual Extension Delayed Ring Assignment -
Ringing
0 = Immediate Ring
1 = Delayed Ring
0
20-04-03 System Options for Virtual Extensions - Call
Coverage Delay Interval
0 ~ 64800 seconds 10
22-01-04 System Options for Incoming Calls - DIL No An-
swer Recall Time
0 ~ 64800 seconds
0 = No Overflow
0
22-02-01 Incoming Call Trunk Setup - Trunk Service Type 0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie Line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode Switching
0
22-08-01 DIL/IRG No Answer Destination - Incoming Ring
Group Number
0 = No Setting
01 ~ 50 = Incoming Group
102 = VMI
103 = Centralized VM
Group01 has 101, 102,
103, 104, 105, 106,
107, and 108 (First 8
ports ringing)
Operation
To answer Delay Ringing calls:
1. Go off-hook.
- OR -
Press the Answer key.
- OR -
Press the flashing key.
Either the Trunk key or CAR/SIE/VE key.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-225
D
To Next Page
Loading...
