NEC SL2100 - SECTION 4 CALLING FEATURES; 4.1 Placing Calls

3. Dial system or group storage code.
Initially, there are 900 System Speed Dialing codes. Group Speed Dialing codes must be defined in
programming.
4. Dial telephone number you want to store (up to 36 digits).
Valid entries are 0~9, # and
*
. To enter a pause, press Transfer key. To store a Flash, press Flash
key.
Enter @ for await answer before sending following digits on ISDN.
5. Press Hold key.
6. Enter the name associated with the Speed Dialing number.
Table 1-1 Keys for Entering Names
Use this keypad digit . . . When you want to. . .
1 Enter characters: 1 @ [ ¥ ] ^ _ ` { | } Á À Â Ã Å Æ Ç É Ê ì ó 0
2 Enter characters: A-C, a-c, 2.
3 Enter characters: D-F, d-f, 3.
4 Enter characters: G-I, g-i, 4.
5 Enter characters: J-L, j-l, 5.
6 Enter characters: M-O, m-o, 6.
7 Enter characters: P-S, p-s, 7.
8 Enter characters: T-V, t-v, 8.
9 Enter characters: W-Z, w-z, 9.
0 Enter characters: 0 ! “ # $ % & ’ ( ) ô õ ú å ä æ ö ü α ε θ В
*
Enter characters:
*
+ , - . / : ; < = > ? π Σ σ Ω ∞ ¢ £
# # = Accepts an entry (only required if two letters on the same key are needed -
ex: TOM). Pressing # again = Space. (In system programming mode, use the
right arrow Softkey instead to accept and/or add a space.)
Clear/Back or DND (2W Digital/IP
Multiline Terminal)
Clear the character entry one character at a time.
Flash Clear all the entries from the point of the flashing cursor and to the right.
7. Press Hold key.
8. Press Speaker key to hang up or repeat steps 3~7 to program another System or Group Speed
Dial bin.
To dial a System Speed Dialing number (When set PRG 15-02-60:0):
1. Go off-hook.
2. Press the Redial key.
- OR -
Press the Right Cursor key until the System Speed Dial menu appears.
- OR -
Dial the System Speed Dialing storage code.
Unless selected by the user, Trunk Group Routing selects the trunk for the call. The system may
optionally select a specific Trunk Group for the call.
If you have a DSS Console, you may be able to press a DSS Console key to chain to a stored number.
SL2100 ISSUE 1.0
1-10
Abbreviated Dialing/Speed Dial
A