Program
No.
Program Name Input Data Default
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-08-12 Class of Service Options (Outgoing Call Service)
- Department Group Step Calling
0 = Off
1 = On
COS 01 ~ 15 = 1
Operation
To make a Step Call:
1. Place a call to a busy Department Group member.
- OR -
Place a call to a Department Group pilot number.
2. Dial Department Step Code (2) to call the next available Department Group member.
3. Repeat step 2 to call other Department Group members.
You step through Department Groups set in PRG 16-02-01.
SL2100 ISSUE 1.0
1-236
Department Step Calling
D
To Next Page
Loading...
