Drop Key
Description
The Drop Key abandons a call while retaining the PBX/Centrex line to originate another call. The Drop
key is provided by programming a Programmable Function key. This feature allows Flash key to be
used to provide a hookflash to the PBX or Central Office. A Single Line Terminal user can use the
Drop key function by an access code.
Conditions
• The Drop key provides a timed disconnect signal on CO/PBX lines.
• The Drop key cannot be used for internal, DID calls.
Default Settings
None
System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Flash
PBX Compatibility/Behind PBX
Guide to Feature Programming
Program
No.
Program Name Input Data Default
11-12-42 Service Code Setup (for Service Access) - Flash
on Trunk lines
0~9,
, # Maximum of 8 digit #3
11-12-59 Service Code Setup (for Service Access) - Trunk
Drop Operation for SLT
0~9,
, # Maximum of 8 digit 660
14-02-03 Analog Trunk Data Setup - Flash Type 0 = Open Loop Flash
1 = Ground
0
14-02-04 Analog Trunk Data Setup - Hooking Type 0 = Timed Flash (Hooking)
1 = Disconnect (Cut)
0
SL2100 ISSUE 1.0
1-296
Drop Key
D
To Next Page
Loading...
