Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that
MUST be set (from a
default state) for this feature to be enabled.
Program
No.
Program Name Input Data Default
35-05-01 * Account Code Setup - Account Code Mode 0 = Account Codes Disabled
1 = Account Codes Optional
(This is for the account code en-
try feature.)
2 = Account Code Required Not
Verified (Forced Account Codes
enabled, no verification with the
system required)
3 = Account Code Required and
Verified (Forced Account Codes
enabled, verification with PRG
35-06-01 required)
0
35-05-02 Account Code Setup - Forced Account Code Toll
Call Setup
0 = Account Codes for ALL calls
1 = Account Codes for TOLL
calls
0
35-05-03 Account Code Setup - Account Codes for Incom-
ing Calls
0 = Disabled (User cannot enter
an account code.)
1 = Enabled (User can enter an
account code while on an incom-
ing call.)
0
35-05-04 Account Code Setup - Hiding Account Codes 0 = Account Codes displayed
1 = Account Codes not displayed
0
35-06-01 Verified Account Code Table - Verified Account
Code
1 ~ 9, 0, #, @ (@ = Wild card)
(Up to 16 digits)
No Setting
40-10-01 Voice Announcement Service Option - VRS
Fixed Message
0 = Disable (VRS fixed message
will not be played.)
1 = Enable (VRS fixed message
will be played.)
0
15-07-01 Programmable Function Keys 50 = Account Code Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
21-01-14 System Options for Outgoing Calls - Forced Ac-
count Code Inter-digit Timer
0 ~ 64800 seconds 3
14-01-11 Basic Trunk Data Setup - Account Code Re-
quired
0 = Disabled (user cannot enter
account codes using this trunk.)
1 = Enabled (user can enter ac-
count codes using this trunk.)
1
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-13-20 Class of Service Options (Supplementary Serv-
ice) - Account Code/Toll Restriction Operator
Alert (Restricted Operation Transfer)
0 = Off (Call restricted.)
1 = On (Call routed to operator.)
COS 01 ~ 15 = 0
21-04-01 Toll Restriction Class for Extensions - Restric-
tion Class
1 ~ 15 = Toll Class 1 ~ 15 2
21-24-01 Forced Access Dial Data - Dialing Number 1 ~ 0,
, #
(maximum 16 digits)
000
SL2100 ISSUE 1.0
1-18
Account Code Forced/Verified/Unverified
A
To Next Page
Loading...
