Program
No.
Program Name Input Data Default
21-01-18 System Options for Outgoing Calls - Reset Dial
After Failure of Trunk Access
0 = Disable (Off)
1 = Enable (On)
1
Operation
To disconnect a busy trunk:
Multiline Terminal
1. Press a line key for trunk.
- OR -
Dial trunk access code (#0 + trunk number).
You hear busy tone. Trunk numbers are 001 ~ 128.
2. Dial the Service Code (PRG 11-10-26).
You hear confirmation beeps as the system disconnects the trunk.
You can now place a call on the free trunk.
3. Press the line key for the trunk disconnected in step 2.
- OR -
Dial the trunk access code (#0 + trunk number) for the trunk disconnected in step 2.
Single Line Terminal
1. Dial trunk access code (#0 + trunk number).
You hear busy tone. Trunk numbers are 001 ~ 128.
2. Dial Service Code (PRG 11-10-26).
You hear confirmation beeps as the system disconnects the line.
3. Hookflash.
You can now place a call on the free line.
4. Dial the trunk access code (#0 + trunk number) for the trunk disconnected in step 2.
SL2100 ISSUE 1.0
1-328
Forced Trunk Disconnect
F
To Next Page
Loading...
