Program
No.
Program Name Input Data Default
11-11-16 Service Code Setup (for Setup/Entry Operation) -
Force Ringing of Incoming Intercom Calls
0~9,
, # Maximum of 8 digit 723
11-12-06 Service Code Setup (for Service Access) -
Switching of Voice Call and Signal Call
0~9,
, # Maximum of 8 digit 712
15-02-16 Multiline Telephone Basic Data Setup - Hands-
free Operation
0 = Disable (Off)
1 = Enable (On)
1
20-02-12 System Options for Multiline Telephones -
Forced Intercom Ring (ICM Call Type)
0 = Disable (Voice)
1 = Enable (Signal)
1
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-08-10 Class of Service Options (Outgoing Call Service)
- Signal/Voice Call
0 = Off
1 = On
COS 01 ~ 15 = 1
20-09-05 Class of Service Options (Incoming Call Service)
- Signal/Voice Call
0 = Off
1 = On
COS 01 ~ 15 = 1
Operation
To enable Handsfree Answerback for your incoming Intercom calls:
1. Press idle Speaker key.
2. Dial 721.
3. Press Speaker key to hang up.
This disables Forced Intercom Ringing.
To enable Forced Intercom Ringing for your incoming Intercom calls:
1. Press idle Speaker key.
2. Dial 723.
3. Press Speaker key to hang up.
This disables Handsfree Answerback.
To change the way your Intercom call signals the extension you are calling:
1. Dial 1.
If ringing, your call voice-announces. If voice-announced, your call starts to ring the destination. This
option is also available at Single Line Terminals.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-339
H
To Next Page
Loading...
