System Availability
Terminals
All Terminals
Required Component(s)
None
Related Features
Abbreviated Dialing/Speed Dial
Automatic Route Selection (ARS/F-Route)
One-Touch Calling
PBX Compatibility/Behind PBX
Station Message Detail Recording
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Program
No.
Program Name Input Data Default
14-01-11 Basic Trunk Data Setup - Account Code Re-
quired
0 = Disabled (user cannot enter
account codes using this trunk.)
1 = Enabled (user can enter ac-
count codes using this trunk.)
1
35-05-01 * Account Code Setup - Account Code Mode 0 = Account Codes Disabled
1 = Account Codes Optional
(This is for the account code en-
try feature.)
2 = Account Code Required Not
Verified (Forced Account Codes
enabled, no verification with the
system required)
3 = Account Code Required and
Verified (Forced Account Codes
enabled, verification with PRG
35-06-01 required)
0
35-05-03 Account Code Setup - Account Codes for Incom-
ing Calls
0 = Disabled (User cannot enter
an account code.)
1 = Enabled (User can enter an
account code while on an incom-
ing call.)
0
35-05-04 Account Code Setup - Hiding Account Codes 0 = Account Codes displayed
1 = Account Codes not displayed
0
SL2100 ISSUE 1.0
1-22
Account Code Entry
A
To Next Page
Loading...
