Hotel/Motel - DSS Console Monitoring
Description
Use DSS Console Monitoring to see who has messages and Wake-Up Calls and even their room's
status. The DSS Console provides the supervisor's station with unique one-touch room monitoring
abilities. Instead of relying on an elaborate off-line tracking system, the supervisor can press a button
on their DSS Console to see:
• Room telephones with messages waiting
• Room telephones that have Wake Up Calls set or missed
• The status of each room (Checked In, Checked Out, Maid Required, Maid in Room, or Ready to
Inspect) The DSS Console also gives the supervisor's station the full complement of business mode
DSS Console features, including:
• One-button calling to extensions, Door Boxes and outside lines
• Busy Lamp Field (BLF) for extensions and Door Boxes
• Night Service Mode switching
• One-button access to Service Codes and Programmable Feature Key codes
Conditions
None
Default Settings
DSS Consoles are not assigned. Refer to Setting Up DSS Console Monitoring on page 1-359 after
plugging in the console. The console example shown next illustrates some common button
assignments.
Page Switch Wake Up Mode Room Status Mode
Figure 1-17 Digital (2W) DSS Console
These buttons are not programmed at default and must be set in PRG 30-03-01.
Page Switch ON = Buttons 1 ~ 54 are Rooms 1 ~ 54
SLOW FLASH = Buttons 61 ~ 114 are Rooms 61 ~ 114
Digital (2W) DSS
Console
ISSUE 1.0 SL2100
Features and Specifications Manual 1-357
H
To Next Page
Loading...
