NEC SL2100 - Page 440

Guide to Feature Programming
Program
No.
Program Name Input Data Default
11-07-01 Department Group Pilot Numbers - Extension
Group Pilot Number
Dial (Up to 8 digits) Group Number 1-49 :
Pilot Number
3101-3149
Group Number 50 : Pi-
lot Number 3999
Group Number 1-49 :
Pilot Number is No Set-
ting
45-01-01 Voice Mail Integration Options - Voice Mail De-
partment Group Number
0 = No Voice Mail Assigned
1 ~ 50 = Department Group 1 ~
50
Department Group 50
15-03-01 Single Line Telephone Basic Data Setup - SLT
Signaling Type
0 = DP
1 = DTMF
Extensions 213 ~ 228 =
Dial Pulse (0)
Other Extensions =
DTMF (1)
15-03-03 Single Line Telephone Basic Data Setup - Termi-
nal Type
0 = Normal
1 = Special
Extensions 213 ~ 228 =
Special (1)
Other Extensions =
Normal (0)
16-02-01 Department Group Assignment 1 ~ 50
If department group 50 al-
ready used, InMail auto set-
ting does not function.
Extensions 213 ~ 228 =
50
Other Extensions =
Group 1
Operation
Cold Start
1. Turn SL2100 power off.
2. Once the system has powered down, push in and hold the Load button.
3. Turn SL2100 power on.
4. Continue holding the Load button for approximately three seconds or until ALM LED (red) lights.
5. Release the Load button.
6. Programming changes are made automatically.
SL2100 ISSUE 1.0
1-426
InMail-Auto Setting
I