EasyManua.ls Logo

NEC SL2100 - Table 1-33 Incoming Ringing Tone

NEC SL2100
978 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Program
No.
Program Name Input Data Default
21-01-02 System Options for Outgoing Calls - Intercom In-
terdigit Time
0 ~ 64800 seconds 10
82-01-01
(01)
Incoming Ring Tone - Frequency 1 1 = 520 Hz
2 = 540 Hz
3 = 660 Hz
4 = 760 Hz
5 = 1100 Hz
6 = 1400 Hz
7 = 2000 Hz
Refer to Programming
Manual.
82-01-02 Incoming Ring Tone - Frequency 2 1 = 520 Hz
2 = 540 Hz
3 = 660 Hz
4 = 760 Hz
5 = 1100 Hz
6 = 1400 Hz
7 = 2000 Hz
Refer to Table 1-33 In-
coming Ringing
Tone on page 1-474.
82-01-03 Incoming Ring Tone - Modulation 0 = No Modulation
1 = 8 Hz Modulation
2 = 16 Hz Modulation
3 = Envelope
Refer to Table 1-33 In-
coming Ringing
Tone on page 1-474.
Handsfree Answerback/Forced Intercom Ringing:
Program
No.
Program Name Input Data Default
20-02-12 System Options for Multiline Telephones -
Forced Intercom Ring (ICM Call Type)
0 = Disable (Voice)
1 = Enable (Signal)
1
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-08-10 Class of Service Options (Outgoing Call Service)
- Signal/Voice Call
0 = Off
1 = On
COS 01 ~ 15 = 1
20-09-05 Class of Service Options (Incoming Call Service)
- Signal/Voice Call
0 = Off
1 = On
COS 01 ~ 15 = 1
20-13-06 Class of Service Options (Supplementary Serv-
ice) - Automatic Off-Hook Signaling (Automatic
Override)
0 = Off (manually)
1 = On (automatically)
COS 01 ~ 15 = 1
80-01-01
(28)
Service Tone Setup - Tone 28, Speaker Monitor
Tone
0 ~ 255 (0 = Endless) Refer to Service tones
(Service Tone #28).
80-01-02 Service Tone Setup - Basic Tone Number 0 ~ 33
(0 = No Tone)
(33 = Default Time Slot)
Refer to the Program-
ming Manual for the
default values.
82-01-01 Incoming Ring Tone - Frequency 1 1 = 520 Hz
2 = 540 Hz
3 = 660 Hz
4 = 760 Hz
5 = 1100 Hz
6 = 1400 Hz
7 = 2000 Hz
Refer to Table 1-33 In-
coming Ringing
Tone on page 1-474.
Table 1-33 Incoming Ringing Tone
Incoming Ring
Tone Number
Tone
Type
Frequency 1 Frequency 2 Modulation
Pattern 1
(Trunk Incoming)
High
Mid
Low
1100
660
520
1400
760
660
16Hz Modulation
16Hz Modulation
16Hz Modulation
SL2100 ISSUE 1.0
1-474
Intercom
I

Table of Contents

Other manuals for NEC SL2100

Related product manuals