NEC SL2100 - Page 489

Incoming Ring
Tone Number
Tone
Type
Frequency 1 Frequency 2 Modulation
Pattern 2 (Trunk Incom-
ing)
High
Mid
Low
1100
660
520
1400
760
660
8Hz Modulation
8Hz Modulation
8Hz Modulation
Pattern 3
(Trunk Incoming)
High
Mid
Low
2000
1400
1100
760
660
540
16Hz Modulation
16Hz Modulation
16Hz Modulation
Pattern 4
(Trunk Incoming)
High
Mid
Low
2000
1400
1100
760
660
540
8Hz Modulation
8Hz Modulation
8Hz Modulation
Pattern 5
(Intercom Incoming Pat-
tern)
High
Mid
Low
1100
660
520
1400
760
660
8Hz Modulation
8Hz Modulation
8Hz Modulation
Pattern 6
(Alarm Sensor Pattern)
High
Mid
Low
760
760
760
760
760
760
No Modulation
No Modulation
No Modulation
Pattern 7
(Trunk Incoming)
High
Mid
Low
1400
760
660
540
540
540
16Hz Modulation
16Hz Modulation
16Hz Modulation
Pattern 8
(Trunk Incoming)
High
Mid
Low
1400
760
660
540
540
540
8Hz Modulation
8Hz Modulation
8Hz Modulation
Pattern 9
(Trunk Incoming)
High
Mid
Low
2000
2000
1100
1100
540
760
16Hz Modulation
16Hz Modulation
16Hz Modulation
Pattern 10
(Trunk Incoming)
High
Mid
Low
2000
2000
1100
1100
540
760
8Hz Modulation
8Hz Modulation
8Hz Modulation
Operation
To place an Intercom call:
1. At Multiline Terminal, press Speaker key.
- OR -
At Single Line Terminal, lift the handset.
2. Dial extension number (or 9 for your operator).
Your call may voice-announce or ring the called extension. Dial 1 to change the way your call alerts
the called extension.
If the extension you call is busy or does not answer, you can dial another extension without hanging
up.
To answer an Intercom call:
1. If you hear two beeps, speak toward telephone.
Your telephone picks up your voice.
- OR -
If your telephone rings, lift the handset.
To check the extension data (Multiline Terminal only):
1. Press Help key.
ISSUE 1.0
SL2100
Features and Specifications Manual 1-475
I