NEC SL2100 - Table 1-40 IP Settings; Table 1-41 System Numbering Plan; Table 1-42 IP Trunks

Tel 101
System A
Carrier
System B
Tel 201
System Data
System A Configuration
Table 1-40 IP Settings
PRG Name Data
10-12 CCPU Network Setup Default Gateway = 172.16.10.254
NAT Route = 1 (Yes)
Default Gateway (WAN) = 10.1.1.254
IP Address (VoIP) = 172.16.10.10
Subnet Mask (VoIP) = 255.255.0.0
84-26 VoIPDB Basic Setup Slot #1:
IP Address = 172.16.10.20
Table 1-41 System Numbering Plan
PRG Name Data
11-01 System Numbering Dial 1: 3 digits, Extension Access
Dial 0: 1 digits, Trunk Access
11-02 Extension Numbering • Port 1 ~ 32:
Extension Number = 101 ~ 132
11-09 Trunk Access Code Trunk Access Code = 0
26-01 Automatic Route Selection Service ARS Service = 1 (Enable)
26-02 Dial Analysis Table for ARS/LCR • Table 1 Dial = 050
Service Type = 1 (TRG)
Additional Data = 3
• Table 2 Dial = 2
Service Type = 1 (TRG)
Additional Data = 5
Table 1-42 IP Trunks
PRG
Name Data
10-23 IP System Interconnection Setup • System No: 1
System Interconnection = 1
IP Address = 172.16.20.10
Dial = 2
10-28 SIP System Information Setup • SIP Profile 1
Domain Name = xxx.xxx.ne.jp
Host Name = xxxxx
Domain Assignment = 1 (Domain)
• SIP Profile 2 none
SL2100 ISSUE 1.0
1-526
IP Trunk - (SIP) Session Initiation Protocol
I