NEC SL2100 - Page 545

Related Features
None
Guide to Feature Programming
The items highlighted in gray are read only and cannot be changed.
Program
No.
Program Name Input Data Default
10-03-01 ETU Setup 128 Refer to Programming
Manual.
10-12-03 CPU Network Setup - Default Gateway 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
10-12-09 CPU Network Setup - IP Address (VoIPDB) 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
172.16.0.10
10-12-10 CPU Network Setup - Subnet Mask (VoIPDB) 128.0.0.0 | 192.0.0.0 | 224.0.0.0 |
240.0.0.0 | 248.0.0.0 | 252.0.0.0 |
254.0.0.0 | 255.0.0.0 |
255.128.0.0 | 255.192.0.0 |
255.224.0.0 | 255.240.0.0 |
255.248.0.0 | 255.252.0.0 |
255.254.0.0 | 255.255.0.0 |
255.255.128.0 | 255.255.192.0 |
255.255.224.0 | 255.255.240.0 |
255.255.248.0 | 255.255.252.0 |
255.255.254.0 | 255.255.255.0 |
255.255.255.128 |
255.255.255.192 |
255.255.255.224 |
255.255.255.240 |
255.255.255.248 |
255.255.255.252 |
255.255.255.254 |
255.255.255.255 |
Refer to the program-
ming manual for all the
possible valid subnet
mask entries.
(default = 255.255.0.0)
10-17-02 H.323 Gatekeeper Setup - Gatekeeper IP Address 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
10-17-04 H.323 Gatekeeper Setup - Preferred Gatekeeper Maximum 124 characters No Setting
10-18-01 H.323 Alias Address Setup - Alias Address Dial up to 12 digits (0 ~ 9,
*
, #) No Setting
10-18-02 H.323 Alias Address Setup - Alias Address Type 0 = E164 0
10-23-01 SIP System Interconnection Setup - System In-
terconnection
0 = No (Disable)
1 = Yes (Enable)
0
10-23-02 SIP System Interconnection Setup - IP Address 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
10-23-04 SIP System Interconnection Setup - Dial Number Up to 12 digits (0 ~ 9) No Setting
14-02-01 Analog Trunk Data Setup - Signaling Type (DP/
DTMF)
0 = Dial Pulse (10 PPS)
2 = DTMF
2
14-05-01 Trunk Group - Trunk Group Number Trunk Port 1 ~ 128 = Priority 1 ~
128
Refer to the Program-
ming Manual for the
default values.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-531
I