Program
No.
Program Name Input Data Default
15-02-07 Multiline Telephone Basic Data Setup - Automat-
ic Hold for CO Lines
0 = Hold
1 = Disconnect (Cut)
1
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
11-12-32 Service Code Setup (for Service Access) - An-
swer for Park Hold
0~9,
, # Maximum of 8 digit
6
20-09-01 Class of Service Options (Incoming Call Service)
- Second Call for DID/DISA/DIL/E&M Override
0 = Off (2nd call will not be al-
lowed.)
1 = On (2nd call is allowed.)
COS 01 ~ 15 = 1
Operation
To answer a call on a different line key with a call in progress:
1. Receive a CO/PBX, DID/DISA/DIL incoming ring.
The line key LED flashes.
2. Press the line key and answer the new call.
The line key LED goes out. The original call is put on hold.
3. If additional calls are received, press the line key to place the current call on hold and connect to
the next call as long as CO line keys are available.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-41
A
To Next Page
Loading...
