NEC SL2100 - Page 553

ISDN - PRI Installation:
Program
No.
Program Name Input Data Default
10-03-04 ETU Setup (PRTA PKG Setup) - Layer 3 Timer
Type
1 ~ 5 1
10-03-06 ETU Setup (PRTA PKG Setup) - Length of Cable 0 = Level 1
1 = Level 2
2 = Level 3
3 = Level 4
4 = Level 5
2
10-03-08 ETU Setup (PRTA PKG Setup) - Dial Sending
Mode
0 = Enblock Sending
1 = Overlap Sending
1
10-03-09 ETU Setup (PRTA PKG Setup) - Dial Information
Element
0 = Keypad Facility
1 = Called Party Number
1
10-03-18 ETU Setup (PRTA PKG Setup) - Type of Number 0 = Unknown
1 = International number
2 = National number
3 = Network Specific number
4 = Subscriber number
5 = Abbreviated number
0
10-03-19 ETU Setup (PRTA PKG Setup) - Numbering Plan
Identification
0 = Unknown
1 = ISDN numbering plan
2 = Data numbering plan
3 = Telex numbering plan
4 = National standard numbering
plan
5 = Private numbering plan
0
10-03-20 ETU Setup (PRTA PKG Setup) - Network Ex-
change Selection
0 = Standard
3 = DMS (A211)
4 = 5ESS
5 = DMS (A233)
6 = 4ESS
7 = NI2
0
10-03-21 ETU Setup (PRTA PKG Setup) - PRI Number of
Ports
0 = Auto
1 = 4 Ports
2 = 8 Ports
3 = 12 Ports
4 = 16 Ports
5 = 20 Ports
0
10-39-01 Fractional Setup - Fractional 0 = Disable (when disabled the
system will assign the PRI as a
full PRI trunks.)
1 = Enable (when enabled the
system will not assign any trunks
to the PRI, the trunks must be
manually configured.)
0
10-51-01 PRTA Mode Selection- PRI Selection 0 = PRI 0: PRI
14-05-01 Trunk Group - Trunk Group Number Trunk Port 1 ~ 128 = Priority 1 ~
128
Refer to Programming
Manual.
21-01-03 System Options for Outgoing Calls - Trunk Inter-
digit Time (External)
0 ~ 64800 seconds 10
21-12-01 ISDN Calling Party Number Setup for Trunks -
Calling Party Number Data
Maximum of 16 digits (0 ~ 9,
*
,
#)
Most Telco's will only accept 10
digits.
No Setting
ISSUE 1.0 SL2100
Features and Specifications Manual 1-539
I