NEC SL2100 - Page 579

Required Component(s)
None
Related Features
Direct Inward Line (DIL)
Ring Groups
Trunk Groups
Guide to Feature Programming
Program
No.
Program Name Input Data Default
14-05-01 Trunk Group - Trunk Group Number Trunk Port 1 ~ 128 = Priority 1 ~
128
Trunk Group Number = 0 ~ 50
Refer to Programming
Manual.
14-06-01 Trunk Group Routing - Trunk Group 0 = Not Set
001 ~ 050 = Trunk group No.
101 ~ 150 = 100 + Networking
System No.
1001 ~ 1050 = 1000 + Route Ta-
ble No.
Refer to the Program-
ming Manual for the
default values.
14-07-01 Trunk Access Map Setup - Access Map 0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on
Hold
4 = Outgoing access and access
when trunk on Hold
5 = Incoming and access when
trunk on Hold
6 = Incoming and outgoing ac-
cess
7 = Full access
Access Map 1 ~ 128 =
Trunk Ports 1~128 as-
signed with option 7 ac-
cess (incoming and
outgoing access and
access when trunk is
on Hold).
15-01-02 Basic Extension Data Setup - Outgoing Trunk
Line Preference
0 = Off
1 = On
0
15-02-10 Multiline Telephone Basic Data Setup - Ringing
Line Preference for Trunk Calls
0 = Idle (Off)
1 = Ringing (On)
1
15-06-01 Trunk Access Map for Extensions - Trunk Ac-
cess Map Number
001 ~ 128 1
20-10-07 Class of Service Options (Answer Service) - Au-
tomatic Off-Hook Answer
0 = Off
1 = On
COS 01 ~ 15 = 0
22-01-01 System Options for Incoming Calls - Incoming
Call Priority
0 = Intercom Call Priority
1 = Trunk Call Priority
1
22-04-01 Incoming Extension Ring Group Assignment -
Extension Number
Maximum eight Digits Group01 has 101, 102,
103, 104, 105, 106,
107, and 108 (First 8
ports ringing)
22-05-01 Incoming Trunk Ring Group Assignment - In-
coming Group Number
0 = No Setting
01 ~ 50 = Incoming Group
102 = VMI
103 = Centralized VM
1
23-03-01 Universal Answer/Auto Answer - Route Table
Number
0 ~ 50 0
ISSUE 1.0 SL2100
Features and Specifications Manual 1-565
L