Guide to Feature Programming
Program
No.
Program Name Input Data Default
11-12-21 Service Code Setup (for Service Access) - Meet-
Me Answer to Specified Internal Paging Group
0~9,
, # Maximum of 8 digit 764
11-12-22 Service Code Setup (for Service Access) - Meet-
Me Answer to External Paging
0~9,
, # Maximum of 8 digit 765
11-12-23 Service Code Setup (for Service Access) - Meet-
Me Answer in Same Paging Group
0~9,
, # Maximum of 8 digit 763
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-10-06 Class of Service Options (Answer Service) -
Meet-Me Conference and Paging
0 = Off
1 = On
COS 01 ~ 15 = 1
31-02-01 Internal Paging Group Assignment - Internal
Paging Group Number
0 ~ 50
(0 = No setting)
All stations = 1
31-02-02 Internal Paging Group Assignment - Internal All
Call Paging Receiving
0 = Off
1 = On
1
For additional programming information on Paging, refer to Paging, External on page 1-677 and Paging,
Internal on page 1-683 features.
Operation
Meet Me External Page
To make a Meet Me External Page:
1. At Multiline Terminal, press Speaker key or pick up the handset.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial Paging code [External 703, or Combined (
1)] and the Paging Zone.
3. Announce the zone.
- OR -
1. At the Multiline Terminal, press the External Paging Zone key (PRG 15-07-01 or SC 751: 19 +
zone).
2. Announce the zone.
To join a Meet Me External Page:
1. At the Multiline Terminal, press Speaker key or pick up the handset.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial 765.
3. Dial the announced External Paging Zone (1~3).
You connect to the other party.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-603
M
To Next Page
Loading...
