To Park an outside call at your extension after trying to call a co-worker:
1. While on a call, press Hold key.
2. Dial a co-worker’s extension number.
The co-worker does not answer.
3. Press the Personal Park key (PRG 15-07 or SC 752:
07).
- OR -
Dial the Personal Park single digit code (PRG 11-16-11).
The Intercom call to the co-worker is dropped. A confirmation tone is heard and the outside call is
parked at your extension.
If the co-worker answers the call, the outside call rings back after the intercom call is completed. The
call can then be placed in Personal park if desired.
To pick up a call parked at your extension:
1. Press the Personal Park key (PRG 15-07 or SC 752:
07).
- OR -
Press Speaker key and dial 757.
At a Single Line Terminal, skip pressing Speaker key.
The Personal Park single-digit service code (PRG 11-16-11) cannot be used in this operation.
If it recalls the extension, pressing the Personal Park key or flashing Speaker key answers the call.
To answer a call parked at a co-worker's extension:
1. Press Speaker key, dial
plus the co-worker’s extension number.
At a Single Line Terminal, skip pressing Speaker key.
To display Caller ID for a call in Park:
With PRG 15-02-08 set to 0 (preselect) for this feature.
1. With PRG 15-02-08 set to 0 (preselect) and a call in Park, press the Park key. (PRG 15-07 or SC
752:
04).
Call Park-Step Call:
To Park a call in the first available system orbit:
You can Park Intercom or trunk calls.
1. Press Hold or Transfer key.
2. Dial #6.
If you hear a busy tone, the orbit is busy. Proceed to step 3.
3. Dial
.
PRG 20-11-27 must be enabled in the Multiline Terminals Class of Service.
SL2100 ISSUE 1.0
1-690
Park
P
To Next Page
Loading...
