Programming from a Multiline Terminal
Description
System Programming can be performed from any display Multiline Terminal. Most programming
changes become effective immediately. Other programming changes become effective after the data
is backed up from temporary memory to permanent memory.
Conditions
• Up to two telephones can be in programming mode anytime.
• A maximum of four users can be logged into WebPro anytime.
• WebPro user and Phone programming user can be logged in at the same time for a total of four
users in programming mode simultaneously. All the logged in users can show up in session
management in WebPro.
• PCPro can be logged in with only one user. This is allowed only if no other users are logged into
programming mode (PCPro, WebPro, or Phone). Also, if a user is connected to the switch via
PCPro, no other user can log in through PCPro, WebPro, or Phone Programming.
• Programming from a Multiline Terminal can require a password to enter programming.
Default Settings
Enabled
System Availability
Terminals
Multiline Terminals with display
Required Component(s)
082U-B1 (2W Digital Multiline Terminal)
Required Software
None
Related Features
PC Programming
ISSUE 1.0
SL2100
Features and Specifications Manual 1-715
P
To Next Page
Loading...
