NEC SL2100 - Page 730

Guide to Feature Programming
Program
No.
Program Name Input Data Default
90-02-01 Programming Password Setup - User Name Maximum 10 characters Refer to the Program-
ming Manual for the
default values.
90-02-02 Programming Password Setup - Password Up to eight digits Refer to the Program-
ming Manual for the
default values.
90-02-03 Programming Password Setup - User Level 0 = Prohibited User
2 = IN (Installer Level)
3 = SA (System Administrator
Level 1)
4 = SB (System Administrator
Level 2)
5 = UA (User Programming Ad-
minister Mode Level 1)
Refer to the Program-
ming Manual for the
default values.
Operation
Refer to the SL2100 Programming Manual for additional information.
SL2100 ISSUE 1.0
1-716
Programming from a Multiline Terminal
P