NEC SL2100 - Page 734

Operation
When set PRG 15-02-60 : 0 case.
To redial the last number dialed:
1. Press the Left Cursor key.
REDIAL [#] / ABB is displayed along with the last dialed number.
2. Press the Up Cursor key or Down Cursor key to view the number to dial.
3. Dial #, press Speaker key, lift the handset, or press an idle trunk key.
- OR -
1. Press the List softkey
2. Press the Redial softkey.
REDIAL -01 is displayed along with the last dialed number.
3. Press the up and down arrow to view the number to dial.
4. Dial # or press Speaker key or lift the handset or press and idle trunk key.
To scroll through the last 10 outside numbers dialed:
1. Press the Left Cursor key. Each time the Left Cursor key is pressed, it displays the next most
recently dialed number.
2. When the desired number is displayed, Dial #, press Speaker key, or lift the handset.
- OR -
1. Press the List softkey.
2. Press the Redial softkey.
3. Press the Up Cursor key or Down Cursor key to view the number to dial.
4. Dial #, press Speaker key, or lift the handset.
To access a System Speed Dial bin:
1. Press the Left Cursor key.
REDIAL [#] / ABB is displayed along with the last dialed number.
2. Dial the System Speed Dial bin number.
The number stored in that bin is displayed for your preview.
3. Dial #, press Speaker key, lift the handset, or press an idle trunk key.
To view saved name history of outgoing calls:
1. Press the Left Cursor key.
REDIAL [#] / ABB is displayed along with the last dialed number.
2. Press the Up or Down Cursor key to refresh the list, if the redialed number has a matching
common speed dial bin or extension number associated with it, the name information from PRG
13-04-02 or PRG 15-01-01 is displayed.
3. Press Speaker key or lift the handset to dial the number.
The name information will not display after dialing.
When set PRG 15-02-60: 1 or 2 case.
To redial the last number dialed:
1. Press the Right Cursor key.
Dialed Number is displayed.
SL2100
ISSUE 1.0
1-720
Redial Function
R