NEC SL2100 - Table 1-56 Intercom or Trunk Ring Setting

Program
No.
Program Name Input Data Default
22-03-01 Trunk Ring Tone Range - Ring Tone Pattern 0 = Tone 1
1 = Tone 2
2 = Tone 3
3 = Tone 4
4 = Melody 1 (2W Digital/IP Mul-
tiline Terminal)
5 = Melody 2 (2W Digital/IP Mul-
tiline Terminal)
6 = Melody 3 (2W Digital/IP Mul-
tiline Terminal)
7 = Melody 4 (2W Digital/IP Mul-
tiline Terminal)
8 = Melody 5 (2W Digital/IP Mul-
tiline Terminal)
9 = Tone 5 (2W Digital/IP Multi-
line Terminal)
10 = Tone 6 (2W Digital/IP Multi-
line Terminal)
11 = Tone 7 (2W Digital/IP Multi-
line Terminal)
12 = Tone 8 (2W Digital/IP Multi-
line Terminal)
0
Table 1-56 Intercom or Trunk Ring Setting
1 = High
5 = Ring Tone 2
2 = Mid Range 6 = Ring Tone 3
3 = Low 7 = Ring Tone 4
4 = Ring Tone 1 8 = Ring Tone 5
Operation
To change your extension incoming ring tones:
1. Press Speaker key.
2. Dial 720.
3. Dial 1 to set Intercom ring; 2 to set trunk ring.
4. Dial code for the desired ring pattern (1~8 (2W Digital/IP Multiline Terminal)).
5. Press Speaker key to hang up.
To listen to the incoming ring choices:
1. Press idle Speaker key.
2. Dial 711.
3. Dial 1 to listen to Intercom ring; 2 to listen to trunk ring.
4. For Intercom Ring:
Dial the code for the ring pattern you want to hear (1~8 (2W Digital/IP Multiline Terminal)).
- OR -
For Trunk Ring:
Dial code for the ring pattern you want to hear (Ring 1~3, Melody 4~8). If you select Ring 1~3, a
second screen prompts for the tone pattern (1~4). (2W Digital/IP Multiline Terminal).
5. Press Speaker key to hang up.
ISSUE 1.0
SL2100
Features and Specifications Manual 1-767
S