Station Hunt
Description
After calling a busy extension, a call immediately hunts to the next available member of the Hunt
Group (Department Group). The caller does not have to hang up and place another Intercom call if the
first extension called is unavailable.
Conditions
• If required, use this option to change the Department Step Calling Single Digit Service Code (default
2).
• A function key for Department Step Calling can be assigned (code 36).
• In PRG 20-08-12, enable (1) or disable (0) an extension user ability to use Department Step Calling.
Default Settings
Disabled
System Availability
Terminals
All Terminals
Required Component(s)
None
Related Features
Department Calling
Department Step Calling
Guide to Feature Programming
Program
No.
Program Name Input Data Default
11-16-01 Single Digit Service Code Setup - Step Call 0~9,
, # Maximum of 1 digit 2
16-01-03 Department Group Basic Data Setup - Depart-
ment Routing when Busy (Auto Step Call)
0 = Normal (Intercom caller
hears busy tone.)
1 = Circular (Intercom caller
routes to an idle group member.)
0
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
ISSUE 1.0 SL2100
Features and Specifications Manual 1-787
S
To Next Page
Loading...
