NEC SL2100 - Page 811

Program
No.
Program Name Input Data Default
35-01-01 SMDR Options - Output Port Type 0 = No Setting (SMDR disabled)
3 = LAN (SMDR enabled and
sent out of the LAN port.)
3
35-02-21 SMDR Output Options - S-Point Terminal Num-
ber
0 = MSN Number
1 = Extension Number
0
10-12-01 CPU Network Setup - IP Address 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
192.168.0.10
10-12-02 CPU Network Setup - Subnet Mask 128.0.0.0 | 192.0.0.0 | 224.0.0.0 |
240.0.0.0 | 248.0.0.0 | 252.0.0.0 |
254.0.0.0 | 255.0.0.0 |
255.128.0.0 | 255.192.0.0 |
255.224.0.0 | 255.240.0.0 |
255.248.0.0 | 255.252.0.0 |
255.254.0.0 | 255.255.0.0 |
255.255.128.0 | 255.255.192.0 |
255.255.224.0 | 255.255.240.0 |
255.255.248.0 | 255.255.252.0 |
255.255.254.0 | 255.255.255.0 |
255.255.255.128 |
255.255.255.192 |
255.255.255.224 |
255.255.255.240 |
255.255.255.248 |
255.255.255.252 |
255.255.255.254 |
255.255.255.255 |
255.255.255.0
10-12-03 CPU Network Setup - Default Gateway 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
10-12-09 CPU Network Setup - IP Address (VoIPDB) 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
172.16.0.10
10-12-10 CPU Network Setup - Subnet Mask (VoIPDB) 128.0.0.0 | 192.0.0.0 | 224.0.0.0 |
240.0.0.0 | 248.0.0.0 | 252.0.0.0 |
254.0.0.0 | 255.0.0.0 |
255.128.0.0 | 255.192.0.0 |
255.224.0.0 | 255.240.0.0 |
255.248.0.0 | 255.252.0.0 |
255.254.0.0 | 255.255.0.0 |
255.255.128.0 | 255.255.192.0 |
255.255.224.0 | 255.255.240.0 |
255.255.248.0 | 255.255.252.0 |
255.255.254.0 | 255.255.255.0 |
255.255.255.128 |
255.255.255.192 |
255.255.255.224 |
255.255.255.240 |
255.255.255.248 |
255.255.255.252 |
255.255.255.254 |
255.255.255.255 |
Refer to the program-
ming manual for all the
possible valid subnet
mask entries.
(default = 255.255.0.0)
10-20-03 LAN Setup for External Equipment - Keep Alive
Time
1 ~ 255 seconds 30
20-07-18 Class of Service Options (Administrator Level) -
SMDR Printout Accumulated Extension Data
0 = Off
1 = On
COS1 ~ 14/COS15 = 1
20-07-19 Class of Service Options (Administrator Level) -
SMDR Printout Department Group (STG) Data
0 = Off
1 = On
COS1 ~ 14/COS15 = 1
20-13-20 Class of Service Options (Supplementary Serv-
ice) - Account Code/Toll Restriction Operator
Alert (Restricted Operation Transfer)
0 = Off (Call restricted.)
1 = On (Call routed to operator.)
COS 01 ~ 15 = 0
20-13-36 Class of Service Options (Supplementary Serv-
ice) - Call Duration Timer Display
0 = Off
1 = On
COS 01 ~ 15 = 1
ISSUE 1.0 SL2100
Features and Specifications Manual 1-797
S