Station Name Assignment - User
Programmable
Description
This feature allows a user to program the Station Name for their telephone extension or any extension
within the system. The name is displayed on the Multiline Terminal LCD when an intercom call is
placed.
Conditions
• Display telephones use extension names for Directory Dialing.
• Single Line Terminal extensions cannot program names.
Default Settings
Enabled
System Availability
Terminals
All display Multiline Terminals
Required Component(s)
None
Related Features
Directory Dialing
Name Storing
Guide to Feature Programming
Program
No.
Program Name Input Data Default
11-11-22 Service Code Setup (for Setup/Entry Operation) -
Extension Name Programming
0~9,
, # Maximum of 8 digit 700
15-01-01 Basic Extension Data Setup - Extension Name Up to 12 Characters No Setting
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
SL2100 ISSUE 1.0
1-804
Station Name Assignment - User Programmable
S
To Next Page
Loading...
