NEC SL2100 - Page 819

Program
No.
Program Name Input Data Default
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-13-21 Class of Service Options (Supplementary Serv-
ice) - Extension Name
0 = Off
1 = On
COS 01 ~ 15 = 1
Operation
To program your extension name:
1. Press Speaker key.
2. Dial 700.
- OR -
Press the Extension Name Change key (PRG 15-07 or SC 751: 55).
3. Press Hold key.
4. Enter the name. (Refer to Table 1-54 Selectable Display Messaging Defaults (2W Digital/IP
Multiline Terminal on page 1-762.)
Your name can be up to 12 digits maximum.
5. Press Hold key.
6. Press Speaker key to hang up.
To program any extension name:
1. Press Speaker key.
2. Dial 700.
- OR -
Press the Extension Name Change key (PRG 15-07 or SC751: 55).
3. Enter the extension number to be named.
4. Enter a name. (Refer to Table 1-61 Keys for Entering Names on page 1-806.)
The name can have up to 12 digits maximum.
5. Press Hold key.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-805
S