Program
No.
Program Name Input Data Default
11-12-05 Service Code Setup (for Service Access) - Can-
cel Camp-On
0~9,
, # Maximum of 8 digit 770
11-16-05 Single Digit Service Code Setup - Camp-On 0~9,
, # Maximum of 1 digit #
15-07-01 Programmable Function Keys Line Key 1 ~ 32
0 ~ 99 (Normal Function Code
751 by default)
*00 ~ *99 (Appearance Function
Code) (Service Code752 by de-
fault)
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
20-01-08 System Options - Trunk Queuing Callback Time 0 ~ 64800 seconds 15
20-01-09 System Options - Callback/Trunk Queuing Can-
cel Time
0 ~ 64800 seconds 64800
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-11-07 Class of Service Options (Hold/Transfer Service)
- Transfer Without Holding
0 = Off
1 = On
COS 01 ~ 15 = 0
20-29-01 Timer Class for Extension - Timer Class for Ex-
tension
0 ~ 15
0 = Not assigned
0
20-31-01 Timer Class Timer Assignment - Trunk Queuing
Callback Duration Time
0 ~ 64800 seconds 15
20-31-02 Timer Class Timer Assignment - Callback / Trunk
Queuing Cancel Time
0 ~ 64800 seconds 64800
Operation
To queue for a busy trunk:
1. Try to access the busy trunk.
2. Dial 750 or press the Trunk Queuing/Camp-On key (PRG 15-07 or SC 751: 35).
3. Hang up to leave a Trunk Queuing request.
- OR -
Wait Off-Hook to Camp-On to the trunk.
To answer when Trunk Queuing calls you back:
1. Lift the handset.
To cancel a Trunk Queuing/Camp-On request:
1. At the Multiline Terminal, press idle Speaker key.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial 770.
3. At the Multiline Terminal, press Speaker key to hang up.
- OR -
At the Single Line Terminal, hang up.
SL2100
ISSUE 1.0
1-850
Trunk Queuing/Camp-On
T
To Next Page
Loading...
