Single Line Terminals
Code Restriction/Toll Restriction
Guide to Feature Programming
Program
No.
Program Name Input Data Default
14-01-17 Basic Trunk Data Setup - Trunk to Trunk Warning
Tone for Long Conversation Alarm
0 = Disable (No)
1 = Enable (Yes)
0
14-01-25 Basic Trunk Data Setup - Continued/Discontin-
ued Trunk-to-Trunk Conversation
0 = Disable (No)
1 = Enable (Yes)
0
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-13-01 Class of Service Options (Supplementary Serv-
ice) - Long Conversation Alarm
0 = Off
1 = On
COS 01 ~ 15 = 0
20-21-01 System Options for Long Conversation - Long
Conversation Alarm 1
0 ~ 64800 seconds 170
20-21-02 System Options for Long Conversation - Long
Conversation Alarm 2
0 ~ 64800 seconds 180
20-28-01 Trunk to Trunk Conversation - Conversation
Continue Code
0 ~ 9,
, #
(Set for one digit only)
No Setting
20-28-02 Trunk to Trunk Conversation - Conversation Dis-
connect Code
0 ~ 9,
, #
(Set for one digit only)
No Setting
20-28-03 Trunk to Trunk Conversation - Conversation
Continue Time
0 ~ 64800 seconds 0
21-01-01 System Options for Outgoing Calls - Seizure
Trunk Line Mode
0 = Priority Route
1 = Circular Route
0
21-01-03 System Options for Outgoing Calls - Trunk Inter-
digit Time (External)
0 ~ 64800 seconds 10
25-07-07 System Timers for VRS/DISA - Long Conversa-
tion Warning Tone Time
0 ~ 64800 seconds 1800
25-07-08 System Timers for VRS/DISA - Long Conversa-
tion Disconnect Time
0 ~ 64800 seconds 30
Operation
Warning Tone for Long Conversation is automatic if programmed.
Warning Tone for Long Conversation for DISA Callers:
1. A DISA caller dials into the system and places a call.
2. Once the Warning Tone is heard, To continue the call the DISA caller presses the programmed
Continue Code.
- OR -
To disconnect the call, the DISA caller presses the programmed Disconnect Code.
ISSUE 1.0
SL2100
Features and Specifications Manual 1-931
W
To Next Page
Loading...
