NEC SL2100 - Table 2-3 Service Codes by Feature

Dial this Service
Code. . .
1
When you . . . For this feature. . . Also see
Function
Key. . .
Note
1
Except where indicated, dial Service Code from Intercom dial tone (e.g., press idle Speaker key first).
785 Clear the number saved by Save
Number Redial.
Save Number Redial -
790 Use Voice Over after calling a
busy extension.
Voice Over 48
794 Split between two calls on a SLT. Call Waiting -
799 Test Callback operation for a
SLT.
Callback -
Service Codes by Feature
Table 2-3 Service Codes by Feature
For this fea-
ture...
Dial this Service Code...
1
When you ... Also see
Function
Key...
Note
1
Except where indicated, dial Service Code from intercom dial tone (e.g., press idle Speaker
key first).
Speed Dialing 753 + bin + number + Hold + Name +
Hold to store
Store System Speed Dialing num-
bers.
-
754 + bin + number + Hold + Name +
Hold to store
Store Group Speed Dialing num-
bers.
-
#2 + bin Dial a System Speed Dialing num-
ber.
27
#4 + bin Dial a Group Speed Dialing number. 28
#7 + bin Use Personal Speed Dialing. -
Account Codes
*
+ Enter Account code +
*
Enter an Account Code. -
Hookflash + ## + Enter account code
+ Hookflash
Enter an Account Code at an SLT. -
Alarm 727 + 1 or 2 + time, or 727 + 1 or 2
+ 9999 to cancel
Check, set or cancel an alarm. -
Alphanumeric Dis-
play
678 + 0 ~ 14 Select the language used on display
Multiline Terminals.
-
Automatic Call Dis-
tribution (ACD)
*
5 Log out of or in to an ACD Group.
*
10
655 Log out of or in to an ACD Group
from an SLT.
-
656 Activate Work Time from an SLT.
*
17
657 Cancel Work Time from an SLT.
*
17
658 Activate Rest Mode from an SLT.
*
13
659 Cancel Rest Mode from an SLT.
*
13
Hookflash + 660 Use ACD Recording with an SLT. -
Automatic Route
Selection or Trunk
Group Routing
9 Place a call using Trunk Group.
Route an Automatic Route Selec-
tion.
*
02
Background Music 725 Turn Background Music on or off. 04
SL2100 ISSUE 1.0
2-8
Codes Tables